1) Save the zipped file to your desktop.
2) Extract the files to the following directory C:\ATA
3) Then do the following:
C:\ATA>ping 10.1.1.2 (the ip address of the ATA)
Then:...
C:\ATA>dir
Volume in drive C has no label.
Volume Serial Number is 5056-F47A
Directory of C:\ATA
10/15/2002 04:35p <DIR> .
10/15/2002 04:35p <DIR> ..
10/15/2002 04:35p 0 8000.log
07/26/2001 08:07p 47,616 ata186us.exe
07/03/2001 06:10p 3,543 ata186us.txt
10/03/2002 03:15a 1,465 ata18x-v2-15-020927a-contents.txt
05/21/2002 03:17p 60,260 ata18x-v2-15-020927a-elang.kup
09/27/2002 03:17p 309,833 ata18x-v2-15-020927a.zup < (This is the file we will input below.)
05/10/2001 02:41p 4,121 atapost.pl |
05/10/2001 03:40p 1,193 atapost.txt |
07/24/2002 11:14a 33,693 cfgfmt.c |
07/24/2002 11:14a 61,440 cfgfmt.exe ^
03/18/2002 05:18p 902 cptones.txt |
09/06/2002 05:10p 39,909 example_uprofile.txt |
09/12/2002 11:10a 6,819 h323-us-default.html |
11/29/2000 12:35p 32,768 prserv.exe |
03/08/2001 01:38p 2,085 prserv.txt |
08/12/2002 06:03p 2,810 ptag.dat |
05/14/2002 07:04p 139 release_notes.txt |
09/12/2002 11:11a 6,818 sip-us-default.html ^
05/22/2001 05:38p 274,436 transition.zup |
01/16/2002 05:14p 389 UPGRADE_NOTICE.txt |
09/11/2002 02:55p 57 users_guide_url.txt |
12/03/2001 03:06p 32,256 zupinfo.exe |
12/04/2001 10:44a 489 zupinfo.txt ^
23 File(s) 923,041 bytes |
2 Dir(s) 11,775,772,672 bytes free |
|
(Exe file) (detailed description level) |
^ ^ |
| | | ^
C:\ATA>sata186us -any2 -d2 ata18x-v2-15-020927a.zup ->------------|
Using Host: alali with IP : 172.30.114.222 as upgrade server
This machine IP: 172.30.114.222
Upgrade Server Port: 8000
Data stream 0 port: 8500
image found: code -- ata186.itsp2.v2.15
Number of 1024 blocks: 303
------------------------------------------------------------------
ENSURE TO HAVE THE PHONE PLUGGED IN TO THE FIRST PORT OF THE ATA
------------------------------------------------------------------
Using dialpad of your telephone (attached to your ATA box),
press red button to go to main menu, and enter:
100#172*30*114*222*8000# (to upgrade code) ------> input this line into the phone conn. to the ATA exactly!
NOTE:
Pressing 123# will announce your code's version number.
You can later verify that you have upgraded your ATA box.
-------------------------------------------
This program runs continuously; Press <ctrl>-c to abort.
Upgrade server ready...
When the ATA is done upgrading the software, you will receive a voice message stating this. The ATA will reset itself,
there is "NO" need to power off.
No comments:
Post a Comment