Thursday, February 28, 2013

Understanding the Difference Between Restart and Reset


You can reset or restart a phone in Cisco CallManager Administration. What is the
difference between resetting and restarting?

Reset:-

Basically, the reset command causes the IP phone to completely power-cycle and begin again as if it had just been plugged in.

Restart:-

The restart command tells the IP phone to unregister and then reregister with CallManager.

2 comments:

  1. In what scenarios would a Reset/Restart be required while troubleshooting IP Phone issues ?

    ReplyDelete
  2. Very nice and helpful information has been given in this article. I like the way you explain the things. Keep posting. Thanks..Chinese voice overs

    ReplyDelete